Hercules Horizontal Sliding for Coolers, Freezers and Warehouses Application in Brampton, ON

Hercules Horizontal sliding Doors has the door to suit your climate-controlled needs.

Product Benefits

·         Utilized for both pedestrian and material handling traffic, this design is perfectly suited for applications where space limitations restrict the use of swinging doors, or when installation space is available only on one side of the door opening

·         Most suitable when opening sped is not of great importance

·         Available with electric or manual operation

Thermal Performance

·         R-Value - 33, 50

·         Insulation - Foamed-in-place polyiso CFC-free

Technical Specifications
Standard Sizes (Custom options available)​:

·         Width - 5' - 10'

·         Height - 7' - 14'

·         Thickness - 4", 6"

·         R-Value - 33, 50

·         Insulation - Foamed-in-place polyiso CFC-free

·         Door Panel - Structural frame consists of HDPE structural framing clad with the specified metal

Hardware: Heavy-duty hardware and track coated for corrosion resistance, including:

·         Double “J” door track

·         Door panel suspended on two 4 wheel ball-bearing trolleys

·         Floor mounted, adjustable, non-marring, self-lubricating stay rollers

·         Spring-loaded idler sprocket with adjustment to maintain proper drive chain tension

·         Manual disconnects on front and back of door with the concealed release

Gaskets: Cloth reinforced neoprene gaskets, bulb type on vertical casings and header and sweeper gasket on the bottom of a door panel

Safety Edge: Full-height pneumatic instant reversing safety edge on the bottom of a door panel

Defrost: Freezer doors equipped with 120-volt perimeter cables to keep gaskets frost free

Options:

·         Stucco embossed aluminum cladding

·         Stainless steel cladding

·         Freezer door with 120 V perimeter heater cable

·         12” x 12” insulated or heated vision panel

·         Rain hood

·         Kickplates

·         Locking device

·         Inside casings

·         Standard or high-speed operator

·         Radio control open/close

·         Photocell open/close/safety

·         Motion detector open/close/safety

·         Loop detector open/close/safety

·         Time delay close

·         Closing signal warning control

·         Partial opening pedestrian control

·         Electric interlock

·         Pedestrian pass door

·         Heated control panel

·         Custom-designed doors to meet your individual needs

Since its creation, The BestDoor Company, A Division of DuraServ has been dedicated to serving its customers in Ontario, Canada including Concord, Toronto, Mississauga, Brampton, Markham, Vaughan, Hamilton, and Scarborough with high performance doors that satisfy the highest level of specification and which achieve all major international industry certification standards. We have built our success on a precise and timely response to customer needs, thanks to our dedicated and qualified personnel. We deliver a full turn-key service, from the design stage through to after-sales care, in our core markets, as well as in many export destinations around the world. With our fleet of fully stocked vehicles and the team of factory-trained service technicians, we work around the clock to keep your loading dock equipment operating safely and efficiently. Contact us today.

Cold Storage Facilities Must Install Wayne Dalton - Thermospan 200 Insulated Sectional Door in Toronto, Canada

In cold storage facilities, opening of doors to move items in and out of the warehouse is unavoidable and happens hundreds of times a day. This is when unwanted heat enters the facility and when the cold, dry air escapes the warehouse. Frequent opening of doors results to ice crystals on the walls, ceilings and the door of the facility, as well as fogs or even ice and snow on the floor in front of the door. This will in turn result to degeneration of the system’s efficiency that will then require the refrigeration system to run longer and use more energy to make up for it which will then result to higher energy cost. Conduction problem, as well as heat infiltration is also a major concern in these facilities. Doors have to be properly insulated to avoid transmission of heat from closed doors and should have tight seals around the doors’ surfaces to prevent refrigeration loss and heat gain. 

The main purpose of cold storage facilities is to keep unwanted heat out of the warehouse and to maintain refrigeration. If it fails to do just this, then you’re setting yourself up for thousands and thousands of dollars to pay for your annual energy cost. 

I bet you’re asking yourself now, so what exactly is the type of doors that are ideal for cold storage facilities? Luckily for business owners in Toronto, Canada, we have just the right door for you. The Wayne Dalton - Thermospan 200 Insulated Sectional Door. 

Wayne Dalton - Thermospan 200 is an insulated sectional door that is known for providing premium thermal efficiency and low maintenance cost. This door has continuous foamed-in-place polyurethane insulation and a non-conductive thermal break between the inner and outer skins combine to provide a U-value of .057 and an R-value of 17.50. This energy efficient commercial sectional door is a result of a patented manufacturing process by Wayne Dalton. In this process, they have the polyurethane core continuously foamed-in-place between the outer and inner steel skins to form a homogenous sandwich of steel/polyurethane/steel. This results to exceptional thermal efficiency, strength and bonding characteristics. 

Condensation and frost will no longer be a concern with this Wayne Dalton door since the non-conductive thermal break this door has, virtually stops cold air from escaping the facility and heat from being transmitted inside the warehouse. This innovative creation keeps the interior skin at room temperature preventing moisture, frost and ice buildup. 

To sample and enjoy the exceptional features and service of this door, call The BestDoor Company now at 647-952-2188 or send them an email at https://www.thebestdoor.com/contact/ and https://www.thebestdoor.com/service-request/. The BestDoor Company only wants the best for their clients so we only partner with the best in the industry that provides optimum products with the highest quality. The BestDoor Company now servicing Ontario CA, Toronto CA, Concord ON, Mississauga, Brampton, Vaughan, Hamilton, Markham, and Scarborough, Ontario. 

What are the Advantages of Rytec Bantam Model MD600 with Full Vision Clear Panel for Industrial Application in Ontario, CA

The installation of a high- performance door provides a continuous and easy flow of both the workforce and the equipment passing through the egress of the facilities. To uphold the best attribute of the warehouse and manufacturing high- performance door, an efficient safety feature should likewise be incorporated towards a more productive facility. 

With the recent development of the high technology door production, the manufacturing companies have tweaked the door assembly to dramatically reduce the noise if not totally eliminate it.

The installation of the high- performance door in the warehouse or manufacturing industry also requires the skilled technical know-how of the technician otherwise the door will not be utilized efficiently to function in line with its best features.

A highlighted problem has been noted when a commercial door is installed but lacks the design to suit the top speed engagement, it will typically aggravate the delay to fix the traffic congestion for both goods delivery and storage. However, when a high-performance door is already properly set up, the waiting period to open and close the high- performance door surely be swift for the welfare of both the business management and the clients. 

With a fast-growing economy, the warehouse and manufacturing facilities flourish in Ontario, Canada that in effect generated the various related job opportunities. The manufacturing, distribution, and warehousing facilities are in dire need for the installation of high quality, robust yet elegant doors. High quality and robust attributes can provide burden-free years to the management as not to jeopardize their smooth business operation.

Several door companies offer high- performance and elegant doors but they usually use below average materials during the assembly. With this concept, the door and its accessories will most probably require for the mandatory a costly maintenance

At any rate, few companies nowadays integrated high- performance, strength and good appearance to the door products but they offer them for the expensive price range.

To assemble an ideal facility, the doors to be installed should have the flexibility, quick action and high-speed door features’ that are inherent with the safety attribute. Personnel comes in and out expeditiously to efficiently expedite and undertake their respective storage deliveries for safekeeping or distribution to the clients. 

Taking everything into consideration, the products and services of The BestDoor Company are strongly recommended. As a matter of fact, we offer the best high-performance speed door in the industry, which is the Rytec Bantam Model MD600 with Full Vision Clear Panel. 

The Bantam roll door is an economical fabric door, which is an alternative to high maintenance overhead dock doors. With the same qualities and fabric selection, it accommodates most dock applications. As a matter of fact, its advantages are: 

·         It has quick-set break-away tabs that allow the bottom bar to be reset without tools in just seconds, virtually eliminating door downtime.

·         It has a chain hoist and speed governor make for easy manual door operation.

·         It has an integral panel connecting ribs that allow quick, inexpensive replacement of all panel sections and provides resistance to wind and negative pressure.

If you are in Ontario, Canada you have access to all the services and products of The BestDoor Company.

For your needs about Rytec Bantam Full Vision Clear Panel, Rytec high performance doors, commercial high speed doors, Rytec commercial doors, Rytec Bantam Full Vision Clear Panel Ontario CA, and Rytec high performance doors Ontario CA, you may want to visit our official website to learn more.

For your questions and orders, you may call us at the telephone number 647-952-2188 or you may send us an email via our webpage at https://www.thebestdoor.com/contact/.

You may even ask for a service request via our service request page at https://www.thebestdoor.com/service-request/

Our service areas are open to serve you in Ontario CA, Toronto CA, Concord ON, Mississauga, Brampton, Vaughan, Hamilton, Markham, and Scarborough, Ontario.

Ideal for High Traffic Cold Storage Applications Use Albany Ultra Cool High-Speed Door in Brampton, Ontario

The manufacturing facilities are mindful that their goods and commodities should be safeguarded to sustain their good condition and the regulation of the appropriate temperature is significant to sustain and preserve the state of freshness before the scheduled dispatch to the market. 

To this end, the manufacturing and warehousing facilities are in need of the installation of durable yet high speed and tight seal doors to meet the requirement for the cold storage undertaking.

The Albany UltraCool High Speed Door of The BestDoor Company is a durable and high-speed cold storage door that is a fast and safe door, which is designed for cold storage applications. It combines two (2) powerful attributes for the advantage of the manufacturing facility such as environmental control and energy-saving features.

The UltraCool’s fast-cycling speeds and tight seals limit the amount of air infiltration through the door opening, which results in lower energy costs. The tight seal prevents both the temperature outside and inside the manufacturing facilities permeate each other. 

Our doors provide the cost-saving qualities as they seal tight the edges as not to be infiltrated by the outside temperature. The high-speed feature adds value to our products that likewise facilitates safety to the workers. Moreover, our doors are engineered to extend the best solution to the facility’s problem to include its functionality, security, aesthetics, and budget.

Our doors are self-repairing that increases the savings of the company as repair and maintenance costs are reduced dramatically. The breakaway fabric door panel and self-repairing features of the door keep the UltraCool high-speed door functional even after the untoward impact.

For your needs about Albany ultracool door, Albany high speed door, high speed doors, Albany doors, Albany high speed door Brampton ON, and Albany high speed door Toronto CA, you may visit our official website to learn more about the details at  https://www.thebestdoor.com/products/door-products/high-performance-doors/albany-door/

For your queries and questions, you may reach us at telephone number 647-952-2188 or you may email us at https://www.thebestdoor.com/contact. You may also send us your service request at https://www.thebestdoor.com/service-request/

Our service areas will be happy to serve you in Ontario CA, Toronto CA, Concord ON, Mississauga, Brampton, Vaughan, Hamilton, Markham, and Scarborough, Ontario.

Our dedicated personnel awaits your call to provide our paramount assistance for your utmost satisfaction. 

5 Best Features of Rytec CR5000 Clean Roll Door for Food Manufacturing Industry in Ontario, Canada

The food manufacturing industry in Ontario Canada must maintain high standards of cleanliness when distributing and manufacturing products. Food processing represents a working environment that places extraordinarily high and specific demands on the operating resources as part of the production. In this way, a high degree of hygiene is required in these areas where vigorous cleaning regimes are carried out.

Rytec CR5000 Clean Roll Door offered by The BestDoor Company, a Division of DuraServ, is a high-speed door that has extensive experience in the food processing sector. We are the trusted hygienic door for the food manufacturing industry in Ontario, Canada. Rytec’s clean roll door in Ontario CA is suitable for all applications where hygiene and food safety is paramount. The Clean-Roll door is the only UL-listed high-speed roll door designed specifically to meet USDA, FDA, NSF and ISO standards. Designed to allow complete wash-down with numerous sanitary features for applications requiring absolute cleanliness while providing low-maintenance and energy savings. Ideal for USDA, FDA and CFIA applications, the Clean-Roll door can be built up to 12’ wide x 12’ high.

Importantly, The BestDoor Company, a Division of DuraServ, goes much further than just offering a product, we take responsibility for design, manufacture, install and service.

Here are the 5 best features of Rytec CR5000 Clean Roll Door for the food manufacturing industry in Ontario Canada. 

·         Engineered to meet USDA hygienic standards for meat, poultry, dairy and seafood applications.

·         Designed for complete wash-down while innovative engineering prevents liquid contaminants from dripping into the traffic pathway, improving productivity.

·         USDA/FDA-compliant design virtually eliminates potential sites for germ manifestation.

·         High-speed operation, up to 50 inches per second, helps maintain a safe, controlled environment.

·         Drip-Safe™ guard is an automatic pneumatic drip-catch tray that moves under the roll drum when the door opens. This enables fragile food cargoes to safely move through the doorway.

All of the door’s components are fabricated of stainless steel or USDA compliant materials. Designed to allow complete washdown and includes many more sanitary design features that make it the natural choice for applications that demand absolute cleanliness. Plus, it provides all the low-maintenance, energy savings and productivity benefits of a high-speed door. Request a quote today at The BestDoor Company, with our fleet of fully stocked vehicles and a team of factory-trained service technicians, we work around the clock to keep your loading dock equipment operating safely and efficiently. Dial (647) 952-2188.

What are the Advantages of Wayne Dalton - Firestar 700c Insulated Rolling Steel Fire Door for Warehouses in Toronto, Canada?

A commercial door masterpiece has been made for folks of Toronto, Canada to enjoy. It’s called the WAYNE DALTON - FIRESTAR 700C INSULATED ROLLING STEEL FIRE DOOR. The name itself carries several words that are worth pointing out. 

Insulated. When we say insulated, this means that something is covered with a non-conducting material to prevent the passage of heat, electricity or sound into or out of it. Thus an insulated door means saving a lot of money by increasing energy efficiency while also providing sound-proofing. 

Since insulated doors prevent the passage of heat, it will keep heat from escaping the room during winter and will prevent hot air from entering during warmer temperatures. This will result to reduced heating and cooling costs.

Door Strength. Insulated doors are both sturdy and lightweight that are usually made with steel frames with solid insulation in between. This provides added strength compared to non-insulated doors. They are typically more resistant to rusting, damage and dents.

Sound Barrier and Quieter Operation. Insulated doors also prevent passage not just of heat but also of sound. So it acts as a sound barrier, dulling sounds from the outside. Since they are also known for their strength, it also reduces creaks and rattles so it operates much quieter. 

Rolling Steel. Out of all the innovations done to make our everyday life easier and better, rolling steel doors have been one of the top innovative inventions. Rolling steel doors do not only make our life easier by having a smooth and easy operation when used, but it also adds protection to our homes.  These commercial rolling doors are very durable, last longer and are resistant to rotting.

Fire Door. As the name implies, these doors are fire-resistant. They can provide thorough protection to you and your family by reducing the spread of fire and smoke and containing it in just one compartment. But not only does it provide you and the protection of your loved ones during a fire, but it also adds to the value of your home. These rolling fire doors have a way of making a lasting good impression with how it looks sturdy and of high quality. This comes in handy when you plan of renting out the property or selling it. When a house or a property is equipped with fire doors, it makes a remarkable impact on its perceived value. 

So why WAYNE DALTON - FIRESTAR 700C INSULATED ROLLING STEEL FIRE DOOR? Because it has it all. At The BestDoor Company, we made it a priority to give our clients nothing but the best. This Wayne Dalton rolling fire door is the most innovative in the industry and it can be found in Toronto, Canada. It has forward-thinking design, has the ability to drop-test and be automatically reset by anyone without having to wait for a service call. 

If you’re ready to give one of the best doors in the industry a go, give us a call at 647-952-2188 or send us an email through the following: https://www.thebestdoor.com/contact/ and https://www.thebestdoor.com/service-request/. The BestDoor Company also service the following areas: Ontario CA, Toronto CA, Concord ON, Mississauga, Brampton, Vaughan, Hamilton, Markham, and Scarborough, Ontario. The BestDoor Company, you can rest assured that this Wayne Dalton fire door is safe, reliable and perfect for your business.

Five Types of Hercules High-Speed Door Ideal for Controlled Environment or Low Temp Applications in Toronto, CA

At The BestDoor Company, a division of DuraServ Corp, we are a division of the largest distributor in the world for the leading manufacturers of dock equipment and hi-speed doors. Founded since 1984, we have the experience and expertise to offer our services and products in the refrigeration sector. The company has earned a great reputation for providing outstanding products and services to its base of several thousand active customers in Central Ontario.

TheBestDoor Company offers five types of Hercules high-speed freezer doors and high-performance door models namely Hercules Extreme Low-Temperature Overlap Freezer Door, Hercules Bi-Parting Cooler and Freezer Door, Hercules Heavy-Duty Vertical Sliding Door, Hercules Horizontal Sliding Door, and Hercules Infitting Hinged Freezer Door.

HERCULES Controlled Environment Door Solutions, since 1952 has experience, technical knowledge, and manufacturing capabilities, that after 64 years they are still the door of choice for food manufacturers and distributors in the dairy, meat, produce beverage, pharmaceutical, and food processing industries.

1) Hercules Extreme Low-Temperature Overlap Freezer Door

Key Features: 

- Appropriate in a variety of applications

- Suitable for blast freezer as well as extremely low-temperature applications

- Hercules Extreme Low-Temperature Overlap Freezer Door is usually utilized as a pedestrian traffic door for blast freezers, a very low temperature, or any controlled environment

2) Hercules Bi-Parting Cooler and Freezer Door

Key Features:

- Best suited for coolers, freezers, warehouses, and industrial buildings

- Comes with electric and manual operations 

- Suitable for applications where fast opening and closing is very essential, most especially in locations where equipment for handling materials such as forklifts and pallet jacks operate

3) Hercules Heavy-Duty Vertical Sliding Door

Key Features:

-Best suited for drive-thru traffic conjunction with forklifts and other freight transfer vehicles

-Comes with electric and manual operation

-Hercules Heavy-Duty Vertical Sliding Door is suitable for applications where there is a minimum side room; and warehouse loading docks 

4) Hercules Horizontal Sliding Door

Bi-Parting Horizontal Stainless Steel Door

Key Features:

-Best suited for applications where fast opening and closing is vital, most especially in locations where equipment for handling materials such as forklifts pallet jacks operate

-Suitable for coolers, freezers, warehouses, and industrial buildings 

-Comes in electric and manual operation

5) Hercules Infitting Hinged Freezer Door

Key Features:

-Best suited for both indoor and outdoor applications 

-Comes in a two-panel or "double" hinged door for those with larger openings

-Hercules Infitting Hinged Freezer Door is suitable for facilities such as freezers and coolers where only hand truck and workers movement is necessary

Call The BestDoor Company at 647-952-2188, for any inquiries about our HERCULES Controlled Environment Door Solutions models at Hercules low temp freezer door Toronto CA, Hercules low temp freezer door Toronto CA, and Hercules low temp freezer door Ontario CA.

We ensure that we deliver fast and excellent customer service to our clients in all their Hercules Low-Temperature Freezer Doors needs, most especially those living near Mississauga, ON as well as Toronto and Ontario, CA.  

You can contact us directly at https://www.thebestdoor.com/contact/, or visit our Service Area offices at Ontario CA, Toronto CA, Concord ON, Mississauga, Brampton, Vaughan, Hamilton, Markham, and Scarborough.