Pharma-Seal High-Speed Rolling Door for Operational and Sanitary Requirements of Pharmaceutical Industry in Toronto, Canada

The Pharma-Seal door is the tightest sealing, most reliable, high-performance rolling door available at The BestDoor Company, A Division of DuraServ Canada.

Developed both in accordance with the rigorous constraints of pharmaceutical environments and the most corrosive atmospheres, the new materials for the frames and mechanisms of the high performance rolling doors for clean processes are made from multi-composite materials that offer a number of benefits. Multi-composite, because a formulation and design specific to each mechanical and kinematic function significantly increase its resistance to tearing, twisting and denting relative to weld-fabricated solutions. They are smooth and wear-resistant without the paint or crevices inherent in welded structures. Lastly, these materials are even more corrosion-resistant than 316L stainless steel making them fully compliant with the requirements of clean environments. he simple design has no external parts, making it easy to clean. Ideal for pharmaceutical and food and beverage, the Pharma-Seal door in Ontario Canada can be built up to 10' wide x 10' high.

Benefits

·         With only a 3/8-inch gap for the door panel, hidden wind knobs seal the perimeter and withstand negative pressure.

·         Variable speed AC drive enables opening speeds up to 50 inches per second and provides uninterrupted facility operations.

·         Using all USDA/FDA-compliant materials, the Pharma-Seal is engineered to provide unprecedented reliability in class-rated environments.

Construction

·         USDA/FDA-compliant, 2-ply door panel

·         Fully-enclosed 304 stainless steel side frames with removable covers

·         Stainless steel hood assembly

·         Stainless clad bottom bar with loop seal

·         Flush mounted manual release

The Pharma-Seal door is engineered for high-cycle environments. Its simple design has no external parts. A flush membrane switch and flush manual release handle make it easy to clean. Designed to meet the requirements of cGMP facilities, the Pharma-Seal is engineered and manufactured to provide the reliability required for uninterrupted facility operations. 

Easy to Clean - Fully enclosed 304 or 316 stainless steel side and hood covers, and no wind ribs on curtain provide smooth, easy to clean surfaces. 

Safe - The Ry-Beam™ light curtain covers the door opening up to 98 inches to meet OSHA requirements. The door reverses without physical contact providing unparalleled personnel and equipment safety.

Fast - Opens at up to 50 inches per second with an adjustable closing speed to meet your exact specifications. 

Simple to Control - The System 4™ controller features state-of-the-art motion control technology, as well as numerous easy programming options to meet your exact specifications. Absolute encoder eliminates mechanical limit switches. 

Low Profile - The Pharma-Seal requires only 9 inches of side frame clearance and only 14 inches of head clearance. 

Tight Seal - With only a 3/8-inch gap for the curtain, the hidden wind knobs allow this door to be self-sealing around the entire perimeter. 

Manual Release - If power is lost, simply pull the flush manual release handle to open the door. 

Want to see our products in action? To appreciate the power and superior quality of The BestDoor Company, a division of DuraServ, Canada, you have to see the high-speed door for yourself. With several options available for first-hand demonstrations, tell us what you are interested in seeing – we’ll give you a complete rundown in our newly updated state-of-the-art showroom. At The BestDoor Company in Ontario and Toronto Canada we can help you make informed decisions for your facility so you can be assured your industrial equipment will provide the safety, security, and productivity you need for many years to come. For more information and to begin customizing your showroom product demonstration, contact us today at 647-952-2188.

For Moderate Commercial Applications Install Wayne Dalton - Model 2411 Steel Sectional Door in Toronto, Canada

The BestDoor Company steel sectional doors are one of our most in demand products. But why choose steel sectional doors for your loading docks? Sectional doors are designed to save space since it is usually made for compact operations. When the door opens and rises vertically, they are suspended in the ceiling so you don’t need to worry about the additional space the loading dock door will possibly consume. You can use all the valuable space inside for storage and for added maneuvering space for your forklifts. 

Repairs are affordable. A sectional door is usually made of three to eight panels so when one panel is damaged, the damaged panel can easily be replaced without worrying about damaging the others making repairs much more affordable. 

Sectional doors are also reliable and are known for their strength. Each panel is attached to the main door track making it safe to open and close unlike the standard tilt door that only has a few connections, resulting in it going off track much more quickly and easily. 

You are secured with sectional doors. Sectional doors have solid, sturdy structures and have minimum rotation points that make it almost impossible to break into. It can provide maximum security for warehouses against theft and uninvited guests. 

A variety of designs is available. You don’t have to worry about making your warehouses look stuffy and unattractive. Various designs are available for you to choose from. At The BestDoor Company, we have a different range of colors, styles, and materials available that make it easy for you to look for the kind of sectional door that suits your taste.

Why choose the steel sectional door? A steel door is worth it. Steel doors last longer than other natural materials and require less general maintenance. If the steel door is galvanized, it will not rust or rot saving you money on the maintenance that other kinds of doors require. Steel doors can also be painted and are versatile when it comes to molding and stamping it to preferred shapes. You can style it according to what you like and you don’t have to maintain it as frequently.  As its name indicates, a steel door is also durable. This is the kind of door that can withstand forces and attacks, even fire. 

So why should you install The BestDoor Company’s Wayne Dalton – Model 2411 Steel Sectional Door you ask? This Wayne Dalton sectional door is affordable while still providing you with optimum strength and protection. This commercial sectional steel door is designed to enhance the building’s facade by having an embossed exterior skin with a stucco finish. It also has C-shaped vertical stiles that provide additional strength with quick and secure hinge attachment. 

To make sure that Wayne Dalton – Model 2411 Steel Sectional Door of The BestDoor Company is of utmost quality, it is made with 24-gauge ribbed steel sections, the most ideal for top quality, commercial-grade doors. It also has a galvanized steel retainer which is hot-dipped and roll-formed holding up a vinyl bulb-shaped astragal in its bottom section. 

This steel sectional door made available by The BestDoor Company in Ontario, Canada has lite options including insulated or non-insulated factory-installed vision lights or aluminum full-view sections for maximum visibility. This commercial steel sectional door has all the useful features that remind us why steel sectional doors remain as one of the best kinds of doors for our loading docks.

Why choose The BestDoor Company for your loading dock doors needs? We have a team of fully trained and certified technicians that have been servicing areas from Concord, Mississauga, Brampton and Vaughan to Hamilton, Markham and Scarborough of the province of Ontario, Canada for more than 35 years now. We are the most trusted and the largest distributor of the leading manufacturers of dock equipment and hi-speed doors. 

Here is the company that has your best interest at heart and your ultimate satisfaction as their top priority. Call us now at 647-952-2188 or send us a message at https://www.thebestdoor.com/contact/. You can also visit our website https://www.thebestdoor.com/ for more details.

Wayne Dalton - Titan Rolling Steel Service Door is Perfect for the Largest Openings of Industrial Application in Mississauga, ON

Our extensive selection of Wayne Dalton Rolling Steel Service Doors in Ontario, Canada allows us to assist you to find just the right balance between your specific requirements and the most affordable options.

All of the components of the Titan have been designed to make it the largest and most rugged rolling steel door available. From 3/8” thick steel brackets to ¼” minimum guide angles, oversized windsocks and 6” tall slats (up to 14 gauge), you can’t order a stronger door! Best Applications – Extreme width or height openings, extreme wind load requirements, doors that must be operated during significant wind conditions, and severe abuse environments.

·         Left – Miami-Dade 55 PSF Windlock (3” Slat) 

·         Right – Standard Titan Windlock

·         Roller Windlock - Allows Doors to Right – Standard Titan Windlock Be Operated During Intermediate Winds

·         Two-Piece Articulating Windlock with Roller Wheel Bearings Allows Doors to be Operated During High Wind Speeds.

Wayne-Dalton Model Titan
FEATURES & BENEFITS

·         6” tall #9 curved slats, constructed of 18 gauge or 14 gauge hot-dipped galvanized steel with a polyester primer and baked-on gray polyester topcoat paint finish.

·         Standard 20 PSF Windload

·         Heavy-duty cast iron, zinc plated windsocks are utilized for wind load performance and to prevent lateral slat movement.

·         The bottom bar assembly is a double angle steel design with bottom astragal.

·         Sizes up to 70’ wide and 90’ tall (contact the factory for square footage limits)

AVAILABLE OPTIONS

·         High Windload Options

·         Articulating Windlocks for Operational Windload

·         Powder Coated (188 RAL choices)

·         Brush Seal for Curtain, Lintel Brush, and Hood Baffle

·         Manual Chain Hoist

·         Motor Operator

·         Bottom Bar Sensing Edges

·         Anti-Drop Devices (including Wayne-Dalton’s Proprietary ‘DSD’ -Drop Stop Device, and Brake Devices)

·         Exhaust Ports

·         Sloping Bottom Bars

·         Mullions

Wayne Dalton Rolling Steel Service Door Product: 

·         Curtain – Curtain will be composed of interlocking [18][14] gauge galvanized steel slats, roll-formed per ASTM standards and designed to withstand a 20 PSF wind load. Ends of each slat will be fitted with cast iron, zinc plated wind locks.

·         The bottom bar will consist of two equal steel angles, to stiffen curtain, with astragal. When required for additional security, provide slide bolts on the bottom bar.

·         Guides- Guides will be ¼” minimum thick structural grade steel, 3 angle assembly to form a slot of sufficient depth to retain curtains in guides to achieve 20 PSF wind load standard. Guides will be provided with integral windlock.

·         Brackets- Brackets will be of 3/8” minimum thick steel plates, with permanently sealed ball bearings. Designed to enclose ends of the coil and provide support for counterbalance pipe at each end.

·         Counterbalance- A. Curtain to be coiled on a pipe of sufficient size to carry door load with deflection not to exceed .033" per foot of door span and to be correctly balanced by helical springs, oil tempered torsion type. Cast iron barrel plugs will be used to anchor springs to tension shaft and pipe.

·         Hood- Hood will be minimum 24-gauge sheet metal, flanged at the top for attachment to the header and flanged at the bottom to provide longitudinal stiffness. Hood will enclose a curtain coil and counterbalance mechanism.

·         Finish - Shop coat of rust inhibitive primer on nongalvanized surfaces and operating mechanisms.

Wayne-Dalton’s Titan Rolling Steel Service Door is simply the largest, strongest, most rugged rolling steel service door in the industry and perfect for the largest of openings

When it comes to finding the exact rolling steel service door solution, you’ll find the highly experienced staff at The BestDoor Company, a Division of DuraServ ready to assist you. Our extensive selection of rolling steel service doors from Wayne Dalton allows you to find just the right balance between your specific requirements and the most affordable options. Submit a service request today or call us at (647) 952-2188 for more information about our range of door products.

What are the Features of Rytec Plexline Composite Door Fits for Pharmaceutical, Food Facility, or Industrial Application in Concord, CA

The Rytec Plexline Composite Door combines high speed, a tight seal and composite construction for greater efficiency and function even in harsh conditions. Whether for any environment where corrosion is a concern, the Rytec Plexline Composite door provides reliability, a polished appearance, and an alternative to stainless steel at a remarkably low price.

Ideal for pharmaceutical, food facility and industrial applications in Toronto, Canada. Combining the high performance of composite materials with all the benefits of Rytec high-speed doors, the Plexline door offers advanced form and advanced function.

The Rytec Plexline Composite Door, a commercial door in Ontario, Canada offered by The BestDoor Company, a Division of DuraServ Canada, is designed for interior applications where durability, speed, and visual impact are paramount. Engineered for the rigors of high traffic applications, it’s fast, it’s safe, and it can take a hit. The fiberglass composite material offers strength, long-life, and cleanability. The pneumatic reversing edge, thru-beam photo eyes and an optional counterweighted manual brake release ensure safety. The understated architecture and soft lines contribute to a sleek, contemporary design.

Features

• Strong and Durable Composite – Advanced composite materials are corrosion-resistant, chemical-resistant, and more impact-resistant than stainless steel.

• Fast – The direct-drive motor opens the door at up to 50 inches per second for improved traffic flow, productivity, and energy conservation.

• Sleek Design – Smooth lines and a curvilinear structure create a sleek, modern appearance that is easy to clean. Side columns have a soft blended finish with highlights to mimic stainless steel. Optional integrated, ABS plastic hood features a lightly textured surface.

• Safe – Full-width vision panel, two sets of thru-beam photo eyes and a pneumatic, dual-chamber, safety reversing edge are standard. Optional counterweighted brake release opens the door in the event of power loss.

• Full Perimeter Seal – Edge-to-edge brush seal at the top. Two brushes in each side column seal against both sides of the door panel. Soft and pliable vinyl loop along the floor completes the seal.

• Takes a Hit and Resets – Quick-Set™ repair system permits the operator to reset the door with a push of a button after aligning the bottom bar.

• Stainless Steel Alternative – The color palette combined with the composite material offers the comparable aesthetics and durability of stainless steel – all at an economical price.

Benefits

• Rytect Plexline Composite door components ensure compliance and allow for easy cleaning.
• Easy-to-clean composite material is corrosion-resistant, chemical-resistant and offers comparable aesthetics to stainless steel.
• Quickly contain and separate environments with door opening speeds up to 50 inches per second. 

Construction

• Integrated fiberglass wind ribs
• Full-width, replaceable vision panel
• Fiberglass composite side frames
• Front and rear full-height vinyl seals
• Stainless steel-clad break-away bottom bar
• Vinyl loop seal on the bottom bar
• Pathwatch® Safety Light System
• Dual thru-beam photo eyes
• Dual-chamber pneumatic reversing edge
• USDA/FDA-compliant door panel is available in blue or white
• Composite hood and motor cover
• Optional counterweighted lift-assist system

Whether it’s for a pharmaceutical or food facility or an industrial application, the high-performance Plexline Composite Doors in Ontario Canada offers the high aesthetics and durability of stainless steel at a remarkably low price.

Servicing all of Ontario, Canada including Concord, Toronto, Mississauga, Brampton, Markham, Vaughan, Hamilton, and Scarborough. The BestDoor Company, a Division of DuraServ Canada specializes in the installation, repair, and maintenance of high-speed doors in Ontario, Canada, commercial doors in Ontario, Canada, and industrial doors. With years of experience in an ever-changing and demanding world, The BestDoor Company offers a professional, friendly, competent service from initial phone call to design, distribution, installation and unparalleled aftercare service for all types of commercial doors! With our fleet of fully stocked vehicles and the team of factory-trained service technicians, we work around the clock to keep your loading dock equipment operating safely and efficiently. Call at 647-952-2188.

High Standard Commercial Doors Parts and Service Offered by The BestDoor Company in Mississauga, Canada

The BestDoor Company is a proud Division of DuraServ Corp Canada. We specialize in the installation, routine maintenance, and repairs of all types of commercial door products in Toronto, Canada. We offer a true 24/7 service for emergency door repairs. We service all areas in Ontario, Canada including Concord, Toronto, Mississauga, Brampton, Markham, Vaughan, Hamilton, and Scarborough for commercial door repair and commercial door maintenance. We have several fully fitted vehicles available for callouts day or night with specialized equipment for industrial or commercial repairs areas emergency service. 

Whether it’s a new spring, a coil, an opener or a new cable if you need it, The BestDoor Company is here to help for your commercial door service. Believe it or not, a commercial door repair is a complicated mechanism – and even a small failure can have you stuck! That’s why it’s easier and quicker to give the experts at The BestDoor Company technicians a call. We pride ourselves on knowing everything there is to know about commercial door parts and how to install them.

What’s more – we’re happy to help you find any type of part needed. That means every single brand of any age. So no matter your problem, rest easy knowing that we’ll get it sorted. Servicing all of Ontario, Canada including Concord, Toronto, Mississauga, Brampton, Markham, Vaughan, Hamilton, and Scarborough. We offer : 

The one-stop-shop for commercial door repair and parts service in  Toronto, Canada.

• Full fleet of service and installation trucks
• Fully stocked warehouse
• Team of factory trained and fully qualified service technicians – with over 25 years of experience
• Team of knowledgeable coordinators to take your call

OEM Parts and Accessories

OEM Parts: OEM is an abbreviation for Original Equipment Manufacturer. It means the parts are made directly by the manufacturer, not by a third party. After Market Parts.

• Minimize Downtime

We strive to minimize your downtime. If it’s part of the loading dock environment, we can supply it and get you back in operation quickly

• Maximize Productivity

Maximizing productivity with reliable solutions is our commitment to you.

• Stocked Inventory

We strive to have common parts, on our trucks and in our warehouse, to be able to service your equipment quickly.

• Parts Availability

Through APS Resource, we offer ready access to a broad inventory of aftermarket parts and accessories to help you maintain a clean, efficient and safe dock operation.

Planned Maintenance Program

• Protect Your Investment

This program is built on a professional, no-cost and no-obligation survey conducted by our team of factory-trained and experienced technicians. Regular checks of your equipment keep them running as they are designed.

• Reduce Lifetime Ownership Costs

The best, most cost-effective maintenance is to eliminate a problem before it happens. Select a frequency that meets your business needs.

How important is regular maintenance for your commercial doors? 

Research shows that where the maintenance of commercial door products represents as little as 1% of a building’s cost, they can account for up to 80% of the total maintenance bill in terms of expensive repairs & replacements should regular maintenance not be carried out.

Our service and maintenance department provides solutions to:

• Keep your commercial door control products operational
• Facilitate the safety and security of your end-users, products & premises

Regular maintenance helps:

• Prevent accidents
• Reduces breakdowns and accompanying inconveniences
• Prolong products life before expensive replacements become necessary

All commercial door products and components are subject to vigorous, daily wear and tear. To ensure they continue to function as they should, regular service and maintenance are imperative to ensure the safety and security of your premises, staff, and visitors as well as assisting you in meeting your legal obligations.

So if your commercial door needs a new part don’t wait to call The BestDoor Company today and get the part today at a price you can afford! We work around the clock to keep your commercial doors from commercial doors, sectional door, door operators and high performance and loading dock equipment up and running. For service, contact any of our local branches, or use our toll-free main number: 647-952-2188.