When it comes to Rolling Steel Service Doors, Wayne Dalton’s model 800, or model 800 is suited for both interior and exterior commercial or industrial applications, even in the harshest conditions.
Wayne-Dalton’s 800 Series rolling doors are composed of curved or flat-faced slats that provide a natural water-shed, helping to reduce corrosion. The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils.
Model 800 rolling steel service door features a strong, double-angle bottom bar that reinforces the lower edge of the curtain against wind pressure and permits varied lock and safety edge options. Further, this bottom bar is designed for easy installation and does not require fasteners protruding into the guide openings thus, limits interference with door operation.
Moreover, the 800 Series offers flexibility in substrate materials with choices of galvanized or prime steel, stainless steel, or aluminum.
Furthermore, this Wayne Dalton (WD) rolling steel service door is built for speed and durability. Its springless design provides a smooth and high cycle operation every time. This innovative springless design creates a door without a single spring to replace for lower maintenance in the field and long-lasting durability.
In addition, this commercial garage door is ideal for high traffic areas but not limited to public and government buildings, parking garages, dealerships, police ports, industrial manufacturing facilities, docks, hospitals, and airports just to name a few.
Standard Features Overview
CONSTRUCTION Max Width:
- Maximum Height Mounting Operation: Curtain Locking
- Bottom Bar Guides
- Brackets Counterbalance
- Wind Load Warranty
- With Hood
- Maximum Width: 42' (12802 mm)
- Maximum Height: 40' (12192 mm)
- Face mount; between jambs.
- Manual push-up (Unless size requires chain hoist)
- 3" galvanized steel curved slats (#4 profile), primed gray, white, beige or brown; 22-gauge steel with alternating end locks.
- Chain holder, suitable for padlocking, on-chain operated doors.
- Galvanized steel double angle with weatherstrip.
- Galvanized roll-formed steel channel; factory painted black.
- 1/4" steel plates with permanently sealed ball bearing, factory painted black.
- Steel pipe, factory painted black, of adequate size to restrict a maximum deflection of .033" per linear foot. Oil tempered, 20,000 cycle helical springs. 24-gauge galvanized steel round hood; primed gray, white, beige or brown.
- Operation: Crank (awning, wall), chain hoist, motor, through the wall
- Slat options: 3" flat slat, perforated flat slat, 6" curved slat
- Curtain options: Steel, stainless steel, aluminum
- Curtain finish: G-90 galvanized bare or painted beige, gray, white or brown, stainless steel #4, aluminum anodized finishes, powder coat (RAL and custom)
- Locking: Slide bolts, cylinder, Best lock, thumb turn
- Bottom bar: Stainless steel double angle, structural steel angle construction (galvanized steel only),
- extruded aluminum, sloped
- Bottom edge: Astragal, pneumatic or electric sensing edge
- Hood: 22-gauge hood option, square hood option
- Spring: Up to 200,000 cycles, options available dependent on door size and weight
- Guides: Structural three-angle:
- galvanized steel, stainless; hot-dipped galvanized (structural steel angle only)
- Brackets finish: Galvanized (hot dipped), stainless steel #4, powder coat (RAL and custom)
- Perimeter seals: Angled guide brush seal, clip-on vinyl guide seal, exterior lintel weather seal, interior weather baffle
- Wind load: Minimum of +/- 20 PSF up to +/- 55 PSF; options available to meet up to Dade County – Florida Building Commission High-Velocity Hurricane Zone (FBC HVHZ)
Other options: Wind locks alternating or continuous with wind bar, end covers, fascia, drop stop device, open fenestrations, vision lite, pass door
Slat Profiles:
#34 Slat Profile
Standard: 22-gauge front; 24-gauge back cover; Polyurethane Foamed-in-Place Insulation
Available: Up to 18-gauge steel or stainless steel front 16-gauge aluminum front
Pitch*: 2.45”
#14 Slat Profile
Standard: Flat slat, 22-gauge steel
Available: Up to 16-gauge steel, 18-gauge stainless steel or 14-gauge aluminum (mill, clear, or bronze anodized).
Pitch*: 2.45”
#14 Slat Profile – Ventilated
Available: Ventilated flat-faced slat with 5” x ¾” rectangular holes evenly spaced across the width of slat; or per spec. Maximum of 20 ventilated slats per curtain. 20 PSF maximum. 22, 20, or 18-gauge steel or stainless steel. Vision lite.
Pitch*: 2.45
One of our friendly representatives will be happy to walk you through our products and accessories. At The BestDoor Company, we place a great deal of pride in designing and building rolling doors that are simple to use, and that fit their environment. All of our doors have high-performance features that are rugged, yet innovative in their design approach.
We specialize in residential and commercial rolling steel door products servicing along rolling steel door Ontario CA, rolling steel door Toronto CA, rolling steel door Concord ON, rolling steel door Mississauga ON, rolling steel door Brampton ON, rolling steel door Vaughan ON, rolling steel door Hamilton ON, rolling steel door Markham ON, and rolling steel door Scarborough ON.
Our talented and experienced crews are readily available to serve you round the clock. We take pride in being able to offer a full-service menu to our most valued clients.
Contact us today to learn more about the rolling service doors we offer in Ontario, CA. Call 647-953-2188 and directly contact thru or website at https://www.thebestdoor.com/contact/.
You can visit personally our service areas in Toronto, Concord ON, Mississauga, Brampton, Vaughn, Hamilton, Markham, and Scarborough.
No comments:
Post a Comment